Data Center Immersion Cooling Fluid Research:CAGR of 21.2% during the forecast period

QY Research Inc. (Global Market Report Research Publisher) announces the release of 2024 latest report "Data Center Immersion Cooling Fluid- Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030". Based on current situation and impact historical analysis (2019-2023) and forecast calculations (2024-2030), this report provides a comprehensive analysis of the global Wire Drawing Dies market, including market size, share, demand, industry development status, and forecasts for the next few years.



Liquid cooling uses liquid convection heat transfer to transfer the heat generated by computer operation. Since the specific heat capacity and thermal conductivity of liquid are higher than those of air, it is more suitable for high-power data centers, energy storage systems, etc. Compared with air cooling, the cooling capacity of liquid cooling technology has been greatly improved. For example, 3M compared the performance of immersion liquid cooling and air cooling for data center systems. The results showed that the heat flux density and heat transfer coefficient under liquid cooling conditions were significantly higher than those of air cooling, with better heat dissipation and more energy-saving. The PUE can be reduced to 1.02, and the power density and computing power per unit area of a single rack in the data center can be greatly improved. Immersion cooling is a method of cooling data center IT hardware by directly immersing the hardware in non-conductive liquid. Immersion cooling is in direct contact with electronic devices, and the insulating liquid medium can ensure the insulation of electrical appliances, which can save more than 30% of energy compared to air cooling.



【Get a free sample PDF of this report (Including Full TOC, List of Tables & Figures, Chart)】

https://www.qyresearch.com/reports/3253868/data-center-immersion-cooling-fluid





Data Center Immersion Cooling Fluid Market Summary

According to the new market research report "Global Data Center Immersion Cooling Fluid Market Report 2024-2030", published by QYResearch, the global Data Center Immersion Cooling Fluid market size is projected to reach USD 0.97 billion by 2030, at a CAGR of 21.2% during the forecast period.



Global Data Center Immersion Cooling Fluid MarketSize(US$ Million), 2019-2030
240914-171953.webp (14 KB)

Above data is based on report from QYResearch: Global Data Center Immersion Cooling Fluid Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.



Global Data Center Immersion Cooling Fluid Top10Players Ranking and Market Share (Ranking is based on the revenue of 2023, continually updated)
240914-172013.webp (16 KB)

Above data is based on report from QYResearch: Global Data Center Immersion Cooling Fluid Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.

According to QYResearch Top Players Research Center, the global key manufacturers of Data Center Immersion Cooling Fluid include 3M, Syensqo, Juhua Group, Chemours, Dow, Hexafluo, Zhejiang Noah Fluorochemical, Shell, ExxonMobil, ZheJiang Yonghe Refrigerant, etc. In 2023, the global top 10 players had a share approximately 94.0% in terms of revenue.



Data Center Immersion Cooling Fluid,Global Market Size, Split by Product Segment
240914-172035.webp (21 KB)

Based on or includes research from QYResearch: Global Data Center Immersion Cooling Fluid Market Report 2024-2030.

In terms of product type, currently Fluorocarbon is the largest segment, hold a share of 94.2%.



In terms of product application, currently Single-phase Immersion Cooling is the largest segment, hold a share of 84.2%.

Market Drivers:

As data center hardware continues to evolve and become more powerful, the need for effective cooling solutions continues to grow. Liquid cooling systems provide better thermal management, ensuring optimal performance and longevity of your equipment. Especially important for mission-critical applications and high-performance computing workloads.

Continuous advancements in liquid cooling technology, such as improved coolants, pump designs, and heat exchangers, are driving market growth. These innovations make liquid cooling more reliable, cost-effective, and easier to implement in data center environments.

To reduce energy consumption and operating costs, data center operators are turning to liquid cooling solutions to improve overall energy efficiency. Liquid cooling helps reduce power usage effectiveness (PUE) and reduces the data center's carbon footprint.

Growing concerns about environmental sustainability and corporate social responsibility are driving the adoption of liquid cooling in data centers. Liquid cooling solutions help achieve more sustainable operations by reducing energy consumption and greenhouse gas emissions.



Restraint:

At present, liquid cooling technology, especially immersion liquid cooling technology, still lacks large-scale application in data centers, and lacks corresponding national or industry standards for effective regulation and support. There is a lack of standardized interfaces and interoperability between liquid cooling solutions from different vendors.

Traditional air cooling systems require a lot of space for air ducts and radiators, while liquid cooling is based on the design of liquid containers and the convenience of personnel maintenance, which inevitably limits the scalability of the data center and results in space utilization lower.

Liquid cooling can offer energy efficiency benefits, but concerns related to the environmental impact of the coolant and the sustainability of liquid cooling solutions may limit adoption, particularly in regions with strict environmental regulations.





Opportunity:

Data centers are entering a new era, with applications requiring unprecedented compute and core count demands. Data centers are increasingly demanding high performance, high frequency, intensive workload conditions, multi-core computing including artificial intelligence (AI) and machine learning (ML), and end-to-end data center solutions. Liquid cooling technology provides powerful power and heat dissipation at the lowest operating temperature, efficient and fast.

Green and low-carbon development of data centers has become an industry consensus, so the impact of coolants on the environment is an important evaluation requirement. Generally, the environmental impact of coolants is measured by ozone depletion potential (ODP), global warming potential (GWP), and pollution to soil and groundwater.



ODP describes the ability of a substance to destroy stratospheric ozone, and GWP is used to indicate the magnitude of a substance's impact on global warming. The smaller the ODP and GWP values, the smaller the negative impact of the coolant on the environment. Hydrocarbon and silicone coolants have very low ODP and GWP, and the environmental impact of fluorocarbon coolants is more prominent. With the global emphasis on environmental protection, fluorocarbon coolants with higher ODP have been eliminated, and most products currently in use have an ODP of zero. GWP indicators vary. For example, PFC has strong stability, a long life in the atmosphere, and a GWP value of thousands, while HFE has a lower GWP value in the hundreds. Fluorocarbon liquids should always be used in sealed systems to ensure that they are released into the atmosphere as little as possible.



In terms of soil and groundwater pollution, hydrocarbon and silicone coolants have low evaporation capacity. If they leak in large quantities, they will cause soil or groundwater pollution. Although most synthetic oils are classified as biodegradable, leaks also need to be controlled and cleaned up in a timely manner. At the time of scrapping, all coolants should be treated or recycled, and disposed of in strict accordance with local environmental laws and regulations, management obligations and guidelines in MSDS.



In order to reduce the consumption of high-GWP fluorinated liquids, some governments in the EU have taken measures such as GWP weighted taxes and GWP restrictions for specific applications. EU regulations stipulate that equipment containing fluorinated liquids should be regularly checked for leaks to prevent them from being released into the atmosphere, and liquids with higher GWP values require more frequent leak checks. Therefore, in order to reduce the difficulty of later maintenance, data centers should give priority to coolants that do not require or only require minimal regulatory restrictions (environmentally friendly, non-toxic, biodegradable, etc.).







The report provides a detailed analysis of the market size, growth potential, and key trends for each segment. Through detailed analysis, industry players can identify profit opportunities, develop strategies for specific customer segments, and allocate resources effectively.



The Data Center Immersion Cooling Fluid market is segmented as below:

By Company

3M
Chemours
Syensqo
Shell
Dow
ExxonMobil
Juhua Group
Hexafluo
Zhejiang Noah Fluorochemical
ZheJiang Yonghe Refrigerant



Segment by Type

Fluorocarbon
Hydrocarbon
Organosilicons
Others



Segment by Application

Single-phase Immersion Cooling
Two-phase Immersion Cooling



Each chapter of the report provides detailed information for readers to further understand the Data Center Immersion Cooling Fluid market:

Chapter 1: Introduces the report scope of the Data Center Immersion Cooling Fluid report, global total market size (valve, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry. (2019-2030)

Chapter 2: Detailed analysis of Data Center Immersion Cooling Fluid manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc. (2019-2024)

Chapter 3: Provides the analysis of various Data Center Immersion Cooling Fluid market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments. (2019-2030)

Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.(2019-2030)

Chapter 5: Sales, revenue of Data Center Immersion Cooling Fluid in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world..(2019-2030)

Chapter 6: Sales, revenue of Data Center Immersion Cooling Fluid in country level. It provides sigmate data by Type, and by Application for each country/region.(2019-2030)

Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc. (2019-2024)

Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 9: Conclusion.



Benefits of purchasing QYResearch report:

Competitive Analysis: QYResearch provides in-depth Data Center Immersion Cooling Fluid competitive analysis, including information on key company profiles, new entrants, acquisitions, mergers, large market shear, opportunities, and challenges. These analyses provide clients with a comprehensive understanding of market conditions and competitive dynamics, enabling them to develop effective market strategies and maintain their competitive edge.

Industry Analysis: QYResearch provides Data Center Immersion Cooling Fluid comprehensive industry data and trend analysis, including raw material analysis, market application analysis, product type analysis, market demand analysis, market supply analysis, downstream market analysis, and supply chain analysis.

and trend analysis. These analyses help clients understand the direction of industry development and make informed business decisions.

Market Size: QYResearch provides Data Center Immersion Cooling Fluid market size analysis, including capacity, production, sales, production value, price, cost, and profit analysis. This data helps clients understand market size and development potential, and is an important reference for business development.



Other relevant reports of QYResearch:

Global and China Data Center Immersion Cooling Fluid Market Report & Forecast 2024-2030
Global Data Center Immersion Cooling Fluid Market Insights, Forecast to 2030
Global Data Center Immersion Cooling Fluid Market Research Report 2024
Global Data Center Immersion Cooling Fluid Industry Research Report, Growth Trends and Competitive Analysis 2024-2030
Global Data Center Immersion Cooling Fluid Market Size, Manufacturers, Supply Chain, Sales Channel and Clients, 2024-2030
Data Center Immersion Cooling Fluid - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Data Center Immersion Cooling Fluid - Global Market Insights and Sales Trends 2024
Global Data Center Immersion Cooling Fluid Market Research Report 2023
Global Data Center Immersion Cooling Fluid Sales Market Report 2023
Global Data Center Immersion Cooling Fluid Industry Research Report, Growth Trends and Competitive Analysis 2023-2029
Global Data Center Immersion Cooling Fluid Market Report, History and Forecast 2018-2029, Breakdown Data by Manufacturers, Key Regions, Types and Application
Global and United States Data Center Immersion Cooling Fluid Market Report & Forecast 2022-2028

About Us：

QYResearch founded in California, USA in 2007, which is a leading global market research and consulting company. Our primary business include market research reports, custom reports, commissioned research, IPO consultancy, business plans, etc. With over 17 years of experience and a dedicated research team, we are well placed to provide useful information and data for your business, and we have established offices in 7 countries (include United States, Germany, Switzerland, Japan, Korea, China and India) and business partners in over 30 countries. We have provided industrial information services to more than 60,000 companies in over the world.

Contact Us:
If you have any queries regarding this report or if you would like further information, please contact us:
QY Research Inc.
Add: 17890 Castleton Street Suite 369 City of Industry CA 91748 United States
EN: https://www.qyresearch.com
Email: global@qyresearch.com
Tel: 001-626-842-1666(US)  
JP: https://www.qyresearch.co.jp

This release was published on openPR.