HPMU, Hybrid Power Management Unit, The Portable Power Solution for Battery & Alternative Energy Systems

Scientists and engineers at ESL have developed a solution to improve performance of alternative energy systems and extend the life cycles of typical battery systems. The HPMU, Hybrid Power Management Unit combines the strength of a high-power capacitor and a high energy battery using a power management board to integrate the two. This combined technology enables the battery system to operate at a reduced rate with the recharge and peak-assist of a high-power capacitor. The results are an improved lifetime, reduced battery heating, and extension of the cycle life of traditional battery systems alone.
The Hybryd Power Management Unit is particularly applicable to portable communication devices. This hybrid power operation allows batteries to operate at a lower current level so that the operation can be achieved, and the battery life is extended. Once the battery is exhausted, they can be replaced. However, the hybrid unit can be used again, repeatedly. Electro Standards Laboratoratories can produce a hybrid unit customized for whatever Super Capacitor (SCap) element is required. The battery is sold separately, allowing use of a customer supplied battery.
Extensive work has been done allowing the HPMU to support military communications load profiles such as SATCOM and SINCGARS. Additionally, the HPMU has been integrated into unmanned underwater vehicles hybridizing the thruster load used for station keeping or depth control which experiences pulsed loading on the order of 100W to 150W. Further applications with larger systems have utilized upwards of 250kW using lithium ion capacitors in a different hybrid architecture providing load leveling support with successful completion.
Other applications for this technology include:
• Wave Energy Harvesting
• Recharging stations for UUV (Unmanned Underwater Vehicles)
• Augmentation of Solar Power
• Sonar Listening Stations
• Weather Monitoring Buoys
• Wave Monitoring Buoys
• Tsunami Warning Stations
• Port Monitoring Buoys

To find out more about this technology or to speak with one of our Technical Sales Representatives call 401-943-1164, eslab@ElectroStandards.com, or www.ElectroStandards.com.
Tina Corticelli, Media Manager
Electro Standards Laboratories
36 Western Industrial Drive
Cranston, RI 02921
Tel: 401-943-1164
Fax: 401-946-5790

Electro Standards Laboratories
36 Western Industrial Drive
Cranston, RI 02921

Electronic Products Manufacturer and Research and Development Company located in Cranston, RI. We manufacture communication products such as network switches, interface converters and cable assemblies. The company's R&D Engineers have expertise in electric motors and power systems, including sensor systems, high density energy storage and pulsed power.

This release was published on openPR.