Isabellenhütte Heusler convinces automotive suppliers

LED technology is becoming an increasingly popular choice for lighting up the headlights of modern cars as well as their displays and cockpits. Special resistors are necessary to make the diodes work properly.

LED (light emitting diode) technology provides automotive suppliers with a challenge: The rear part of the light unit leaves only little space for installation and the law requires a minimum brightness level. On top of that, LED chains must not emit different brightness levels and the technology has to withstand high temperatures up to 125 °C.

Consequently, resistors used in LED technology have to be very small, perform extremely well, be extraordinarily robust, highly stable and have a small tolerance. Isabellenhütte’s VMK resistors have the required specifications:

• 1 Watt permanent power up to 110 °C terminal temperature
• Constant current up to 10 A (10 mOhm)
• Small size (1206; 3.2 x 1.6 mm)
• High pulse loadability (1 W)
• High long-term stability (0.1 % drift in 2,000 h)
• Component assembly: reflow and IR soldering
• TC < 20 ppm/K (temperature coefficient)
• AEC-Q200 certified

Long side termination alternative
Isabellenhütte’s VLK resistors with long side termination are also used in LED technology. At a size of 0612 (3.25 mm length, 1.52 mm width), they also provide particularly high performance and use little space. The contacts on the long side make the component less susceptible to temperature and load cycles. Specifications at a glance:

• Low resistance starting from 1 mOhm
• 1 Watt permanent power up to 140 °C terminal temperature
• Constant current up to 30 A (1 mOhm)
• Small size (0612)
• High pulse loadability (1 W)
• High long-term stability (0.1 % drift in 2,000 h)
• Component assembly: reflow and IR soldering
• AEC-Q200 certified

For further information and product details, please go to www.isabellenhuette.de

About Isabellenhütte Heusler
Isabellenhütte Heusler GmbH & Co. KG is headquartered in Dillenburg, Hesse, Germany. The company is a leading global manufacturer of thermoelectric alloys, resistance alloys as well as low ohmic precision and power resistors. Isabellenhütte has combined its shunt-based measuring systems under the brand name ISAscale®. First recorded in 1482, the company has been owned by the Heusler family since 1827.

Company contact :
Isabellenhütte Heusler GmbH & Co. KG
Eibacher Weg 3 – 5
D-35683 Dillenburg
Ingmar Georg - Area Sales Manager
Phone: +49 2771 / 934-280
Fax: +49 2771 / 23030
ingmar.georg@isabellenhuette.de

Media:
Wassenberg PR f. Industrie & Technologie GmbH
Rollnerstr. 43
D-90408 Nürnberg
Michaela Wassenberg
Phone: +49 911 / 598 398-0
Fax: +49 911 / 598 398-18
m.wassenberg@tech-communications.net

This release was published on openPR.