Press release
New low cost Boundary Scan Controller for PCI Express
At the SMT/Hybrid/Packaging trade show GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std. 1149.x, introduced the SCANBOOSTER/PCIe-DT, a new high-performance, and low cost Boundary Scan controller, as an addition to the company’s SCANBOOSTER™ product line.The new Boundary Scan controller is compliant with the PCI Express bus specification and supports JTAG/Boundary Scan tests, VarioTAP® emulation tests, in-system programming (ISP) for PLD and FPGA, as well as in-system programming for Flash serial EEPROM devices of moderate size.
“Combining the PCI Express bus bandwidth with SCANBOOSTER™ architecture’s flexibility allows us to provide high-performance solutions for cost-sensitive applications”, says Bettina Richter, GOEPEL electronic’s Corporate Marketing Manager. “At the same time, we take account of the tendency of increasing utilisation of PCI Express as part of the solution platform. The cross compatibility to the existing PCI solutions enables our customers a seamless migration. “
SCANBOOSTER/PCIe-DT consists of a PCIe plug-in card coupled with an external TAP transceiver unit, up to four meters apart. It features two separate Test Access Ports (TAPs) and supports a programmable TCK frequency up to 16 MHz. Exchangeable TAP Interface Cards (TIC) make the controller flexible and future-proofed. Test bus parameters such as output and input voltage as well as output and input impedance can be programmed independently for both TAPs.
As additional resources, the controller provides 32 voltage-level-programmable, dynamic Parallel I/O, two ADC/DAC channels, external trigger signals, and three static I/O. Thus, it is ready to be deployed for extended test and PLD/Flash programming operations.
Programs developed for the controller are cross-compatible with any controller of the SCANBOOSTER™ series or the innovative SCANFLEX® Boundary Scan platform.
SCANBOOSTER/PCIe-DT is fully supported by the industry leading Boundary Scan software SYSTEM CASCON™. SYSTEM CASCON™ is the only completely integrated development environment with a powerful Mixed-Signal programming language (CASLAN) for IEEE Std.1149.x, featuring more than 40 tools for Automatic Test Program Generation (ATPG), pin-fault diagnostics, VarioTAP® emulation test, in-system programming (ISP), debugging, schematic and layout visualisation, and more.
About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. The Company of 160 employees generated revenue of 17.9 million EURO in 2009, maintaining support and sales offices in Germany, France, United Kingdom, China and the United States. An extended distribution and service network of more than 350 specialists ensures excellent local and on-site customer support for several thousand worldwide system installations. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products have won several awards in recent years and are used by the leading companies within telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries.
Additional information about the Company and its products can be found online at www.goepel.com, www.goepel.co.uk or www.goepel.fr.
GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK
Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk
Stefan Meissner
press@goepel.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release New low cost Boundary Scan Controller for PCI Express here
News-ID: 134398 • Views: …
More Releases from GOEPEL electronics Ltd.
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems.
http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html
“In the development…
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA).
http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html
The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also…
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies.
http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html
The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably.
Based on an enhanced SCANFLEX® architecture with…
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport.
http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html
This gain in effectiveness for users is enabled by the OptiCon…
More Releases for PCI
Analog control via PCI/PCI Express with electrical isolation
Maisach/Munich/Germany. With the analog output modules MDA16-2i/-4i/-8i, the manufacturer of measurement technology BMC Messsysteme GmbH (bmcm) launches a module series for isolated, analog control via the PCI or PCI Express bus.
If for the control of power supplies, frequency converters, or engines - potential differences between two circuits can lead to sudden discharges and cause heavy damages. Galvanic isolation is the solution here.
With the new plug-on modules MDA16-2i, MDA16-4i, and MDA16-8i…
BeroNet Launches Berofix With PCI-Express
Berlin, January 8, 2010 – beroNet GmbH, a leader in Voice-over-IP (VoIP) technologies that accelerate the deployment and enable the management of next generation Line-Interface-Cards, announced its newest berofix PCI-Express cards. With berofix PCI-Express card, the latest addition to the card series of berofix, the VoIP experts from Germany demonstrate their practical experience again.
PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe (or PCIe, as it is commonly called),…
eRevMax receives PCI compliance certification
London/ Kolkata, December 10, 2009 – eRevMax has received Payment Card Industry Data Security Standard (PCI DSS) certification from the PCI Security Standards Council, proving the presence of secure and robust systems within the eRevMax portfolio.
The company has ensured its products are compliant with international security best practices and principles which further prove its standing in the industry as a provider of premium quality and secure services. eRevMax has implemented…
Measuring via PCI-Express
Maisach/Munich/Germany. With the PCIe-BASE, BMC Messsysteme GmbH (bmcm) is one of the first few manufacturers of measurement technology to come out with a competitive data acquisition card for the PCI Express interface.
PCI Express (Peripheral Component Interconnect Express), "PCIe" for short, is a PC interface allowing for the communication of peripheral components with the master processor of the PC. In the long term, PCIe will replace the PCI slots in…
Fanless Intel Atom Embedded Computer Offers Wide Power Input Range, Extended Ope …
(Taipei, Taiwan - May 12, 2009) Lanner Electronics, Inc., a leading designer and ODM manufacturer of advanced embedded computing platforms for commercial and industrial applications, today announced the release of the Lanner LUGE LEC-2010 – a small form factor, fanless embedded system based on the Intel® Atom™ processor designed for a broad range of industrial and mobile computing applications.
The LEC-2010 expands on Lanner’s growing line of Atom-based small form…
Kontron KISS PCI 759: Multi-core industrial servers for PICMG 1.0 based PCI/ISA …
Eching, Germany, May 29, 2008 – Today, Kontron announced its latest range of 2U and 4U KISS industrial servers that bring Intel® Core™2 Duo processor performance to PICMG 1.0 based PCI/ISA applications. These long term available, ultra quiet ( < 35 dB) industrial servers are especially designed for applications that require high data processing performance without the need for high-speed PCI Express features.
Designed around the Intel® 945G chipset with…
