openPR Logo
Press release

New Industrial Ethernet-Connectors from ESCHA

03-27-2012 04:41 AM CET | Industry, Real Estate & Construction

Press release from: ESCHA Bauelemente GmbH

The new connectors with a data transmission of 10Gbit/s are equipped with an x-coded mating face.

The new connectors with a data transmission of 10Gbit/s are equipped with an x-coded mating face.

Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and a PCB flange with X-Coding.

Recently, there has been increasing demand for a consistent and reliable data transmission between the harsh industrial area and the office communication. Within the scope of its product range for Industrial-Ethernet-Applications, ESCHA is providing, as of now, new connectivity components in response to market demand for a related interface solution including an M12x1 round connector, a flange and a built-in plug with X-Coding for high field-safety requirements as well as RJ45-connectors for IT-wiring.

New Field Connector

The new 4-paired M12x1 field- round connector is based on the 360°-shielding concept developed by ESCHA. Thereby, connecting the shield is not effected by a cable shielded connection, but through reliable crimping with the shield housing meeting protection class IP67, IP68, and IP69K requirements and further guarantee a safe and reliable 10 Gbit/s-data transmission rate according to Cat6A.

In addition to the pre-manufactured connection- and junction cables, ESCHA also has included a field wireable plug in the product range. Moreover, a portfolio with housing feed-throughs for front- and back wall installations with wires or print-contacts has been created also including an M12x1-flange with right-angled contacts for PCB direct population compensating for a wall thickness of 1 mm to 5 mm upon request. Furthermore, a reflow-capable built-in flange for device installation adapted to customer specific housing is available consistently implementing the shielding concept.

New Office Connectors

In-office tightness and pollution requirements of a connector are lower than those in industrial areas. Therefore, various RJ45-solutions meeting protection class IP20 requirements for this application area are available.

The 4-pole and 8-pole connection- and junction cables of the new RJ45-connector ensure a data transmission according to Cat5e and are also available as overmolded- and field wireable versions. All variants are multi-port capable through their compact housing styles.

Comprehensive Portfolio for IE-Applications

In addition to the new M12x1-connectors with X-Coding and the new RJ45-products, ESCHA continues to offer the time-proven M12x1-portfolio with D-Coding designed for Industrial-Ethernet-Applications with a data transmission rate of Cat5e. This comprehensive 4-pole product range is also based on the frequently proven 360°-shielding concept and guarantees a better network utilization through high signal reserves.

Cables for all existing- and new products are UL-approved and thus meet the safety guidelines of the North American market.

ESCHA - About us

ESCHA is a leading supplier in the fields of connectivity and housing technology. The family-controlled company has been developing and manufacturing in Halver/Germany for more than 25 years. As an innovation leader, ESCHA realizes product novelties taking dynamics to the market for automation components. Based on its standard products, the company designs custom-made connectivity and individual special solutions. With more than 500 employees and highly in-depth development and production, ESCHA is extending its product portfolio constantly and independently.

ESCHA Bauelemente GmbH
Elberfelder Straße 32
58553 Halver
Germany
www.escha.de/en

Dipl.-Medienökonom Florian Schnell
Public Relations Management
Tel. +49 2353 708-156
E-Mail: f.schnell@escha.de
www.escha.de/en/press.htm

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release New Industrial Ethernet-Connectors from ESCHA here

News-ID: 215769 • Views:

More Releases from ESCHA Bauelemente GmbH

(Un)locking made easy
(Un)locking made easy
Halver, 30 May 2016 – For a quick and easy un- and locking of overmolded RJ45-connectors, the connectivity specialist ESCHA is promptly providing the new ESCHA multi-clip. This is easily plugged onto the overmolded RJ45-connector body and is immediately ready-to-use. With ESCHA multi-clip, RJ45-connectors deeply plugged into the port, with their unlocking lugs being hard- or even impossible to reach for by finger, can be unlocked. Besides, RJ45-connectors already plugged cannot
Energy Management System certified successfully
Energy Management System certified successfully
Halver, 26 October 2015 – ESCHA Bauelemente GmbH Energy Management System was successfully certified according to DIN EN ISO 50001:2011 in the middle of October 2015. The audit was carried out by DNV GL-Business Assurance within three days. The certified Energy Management System enables the connector- and housing specialist to determine potentials and continuously enhance energy efficiency of the company. “Introducing an Energy Management System is basically optional“, says Achim
Premiers at SPS IPC Drives 2015
Premiers at SPS IPC Drives 2015
Halver, 22 September 2015 – The connector- and housing specialist ESCHA is presenting new junction components for its product line called ‘M12x1 Power’ at this year’s SPS IPC Drives in Nuremberg. The so called ‘H-junctions‘, ‘h-junctions‘, and, ‘T-junctions‘ also facilitate a serial wiring structure at field level with power applications up to 630V. In addition, ESCHA will be showing price-optimized RJ45 patch cords in industrial quality for switch-cabinet wiring. M12x1 power-junctions The
New Cable Stripping Tools
New Cable Stripping Tools
Halver, 18 August 2015 – As of now, new cable stripping tools supplement the original accessories of the connector- and housing specialist ESCHA. Outer jackets of cables with various lengths and diameters can now be removed easily and quickly with the so called ‘Cable Strip Tool‘ and the ‘Cable Cut Tool‘. Cable Strip Tool The Cable Strip Tool works like a pair of pliers. Thereby, the cable is simply laid between the

All 4 Releases


More Releases for Gbit/s

CASwell CAR-6010 – World's First 400 Gbit/s Ethernet 1U Networking Appliance
Highly scalable high-end rackmount white box based on Intel Xeon-SP platform with unique and flexible network design Taipei, Taiwan - January 17th, 2019 – CASwell, a leading manufacturer of innovative uCPE/vCPE network systems, is thrilled to reveal the CAR-6010 rackmount appliance with its unique and extremely flexible network configurations providing Ethernet bandwidth of up to 400 Gbit/s. The CASwell CAR-6010 appliance stands above the competition with its highly scalable network design specially
Packet slicing in 100 Gbit line rate
Cubro announces packet slicing option with CRC recalculation on multiple 100 Gbit traffic per unit. The EXA32100 is the only multiple 100 Gbit Network Packet Broker which supports packet slicing in-line rate on all 100 Gbit interfaces. There are three options for slicing - 64, 128 and 256 bytes. This feature can be configured on an output port, and it supports dual-stack IPv4 and IPv6. The significant advantage of packet slicing
CASwell Introduced Powerful New CAR-3080 1U Rackmount Network Appliance based on …
Taipei, Taiwan - September 5th, 2018 - CASwell has announced the new CAR-3080 rackmount appliance that can be equipped with ultra-fast networking connections of up to 40 Gbit/s and also offers nearly infinite Ethernet configurations with a maximum of 40 ports in this flat, low-rise 1U design. This setup is made possible by the unique design and combination of CASwell's Network Interface Plug-ins (NIP) and Network Interface Cards (NIC), all
Liantec Announce 1uPCIe-1000 Ultra Low Profile 1U Slim PCIe Intel Gbit Ethernet …
Liantec announce the 1uPCIe-1000 industrial ultra low profile 1U slim PCIe Intel Gigabit Ethernet card solution. The 1uPCIe-1000 is based on the form factor of ultra low profile 1U slim add-on card, features onboard Intel PCIe 82574L Gigabit Ethernet controller, supports auto-switching 10/100/1000BASE Ethernet networking connection and Wake-on-LAN (WoL) functions, meets 1U or 1.75 inches of system height without additional riser card. The 1uPCIe 1U slim PCI Express add-on card series
GOEPEL electronic combines Boundary Scan with real time Test of GBit LAN Interfa …
GOEPEL electronic introduces BAC9305-LAN1G, the latest Bus Access Cables (BAC) as a new member of the industry leading JTAG/Boundary Scan hardware platform SCANFLEX®. For the very first time, in connection with the SCANFLEX® multi port module SFX-9305 the new family member of Bus Access Cables enables the real time test of GBit LAN interfaces in combination with extended JTAG/Boundary Scan operations based on a unique platform. The protocol based functional
12-03-2007 | Logistics & Transport
MOL
MOODY'S RAISES MOL'S RATINGS TO A3
TOKYO - Mitsui O.S.K. Lines, Ltd. (MOL, President: Akimitsu Ashida) today announced that Moody\'s upgraded the company\'s senior unsecured and issuer ratings from Baa1 to A3. Moody\'s cited the following points as its main reasons for the upgrade: 1.MOL has greatly reinforced profitability by increasing the efficiency of its ocean shipping business, in order to cope with unsteady freight rates, bunker prices, and foreign exchange rates in recent years. The company